OGP is committed to offering unmatched customer support and personal service. Training is important in getting the most out of our measurement machines. OGP sales representatives have been through rigorous training on the details of our measurement systems, and are a great first contact for training. Use the worldwide representative finder to contact your local representative for more information on training classes in your area.

Formal training classes are also available at our corporate headquarters in Rochester, NY for metrology and supporting software. Courses combine lecture and hands-on experience starting with an introduction to the system. MeasureMind 3D and ZONE3 Software training classes are scheduled in alternating months, and are on a first come, first served basis. For optimal learning, maximum class size is 4, so make sure to register today.

Note: There is a fee associated with these classes, which varies according to the software. You will be contacted shortly after registering with more information.

Training Schedule

Title Location Dates
MeasureMind 3D Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using MeasureMind 3D MultiSensor software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 10/16/2018 - 10/17/2018
ZONE3 Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using ZONE3 software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 11/13/2018 - 11/15/2018 Full
MeasureMind 3D Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using MeasureMind 3D MultiSensor software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 12/11/2018 - 12/12/2018 Full
ZONE3 Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using ZONE3 software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 01/15/2019 - 01/17/2019 Register
MeasureMind 3D Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using MeasureMind 3D MultiSensor software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 02/12/2019 - 02/13/2019 Register
ZONE3 Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using ZONE3 software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 03/12/2019 - 03/14/2019 Register
MeasureMind 3D Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using MeasureMind 3D MultiSensor software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 04/09/2019 - 04/10/2019 Register
ZONE3 Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using ZONE3 software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 06/11/2019 - 06/13/2019 Register
MeasureMind 3D Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using MeasureMind 3D MultiSensor software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 07/16/2019 - 07/17/2019 Register
ZONE3 Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using ZONE3 software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 08/13/2019 - 08/15/2019 Register
MeasureMind 3D Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using MeasureMind 3D MultiSensor software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 09/17/2019 - 09/18/2019 Register
ZONE3 Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using ZONE3 software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 11/05/2019 - 11/06/2019 Register
MeasureMind 3D Training
Basic operations are reviewed and used to program sample parts. The goal of the course is to strengthen skills and provide specific help for beginning students using MeasureMind 3D MultiSensor software. Separate courses are available for the use and calibration of all multi-sensors.
Rochester, NY 12/10/2019 - 12/11/2019 Register

Additional Classes Offered

Please contact OGP at sales@ogpnet.com to make arrangements for these classes.

Title Location
Multisensor Overview
This course provides a basic overview of how to use multisensor features to measure parts on the OGP 3D training part. Recommended if video system has any combination of multisensor options.
OGP Regional Office
Touch Probe (1 day)
This course provides a basic overview of how to use the touch probe to measure features on the OGP 3D training part.
OGP Regional Office
Laser (1 day)
This course provides a basic overview of how to use the DRS laser to measure features on the OGP 3D training part.
OGP Regional Office
Rotary Indexer (1 day)
This course provides a basic overview of how to use the MTR Rotary Indexer to measure features on the OGP 3D training part.
OGP Regional Office
MeasureFit (1 day)
This course covers the basic use of the MeasureFit software using generic parts. Applications Support is recommended for customers interested in solving specific applications.
OGP Regional Office
Application Support (per day)
For customers requiring assistance, this provides the services of an OGP application engineer at an OGP Regional Technology Center.
OGP Regional Office
Application Support (per day)
For customers requiring assistance, this provides the services of an OGP application engineer at the customer site. Please inquire for more details.
Customer Site (On-Site)

Terms of UsePrivacy Policy footer_icon_ogp_phone.pngfooter_icon_ogp_email.png

Quality Vision International

Copyright © 2018 Quality Vision International Inc.
All Rights Reserved.

 ISO Certified

OGP systems are manufactured by Quality Vision International in Rochester, New York.